Installing a roof lantern involves more than fitting the frame into an opening. The kerb, roof covering, seals and surrounding junctions must work together to create a secure, weather-resistant finish.

For installers working on flat roof extensions and conservatory projects, planning these details before installation can help avoid site delays, water ingress and problems with the finished appearance.

Preparing the Roof Opening

Before installation, check the roof structure, opening dimensions and lantern specification. The supporting framework must be suitable for the unit, with the opening prepared in accordance with the manufacturer’s requirements.

Check the following before the lantern arrives on site:

  • Opening dimensions: Confirm the finished opening matches the lantern specification and allows for the required supporting kerb.
  • Structural support: Ensure the surrounding framework can support the lantern and transfer loads appropriately.
  • Roof build-up: Plan how the insulation, roof covering and internal finish will meet the opening.
  • Installation requirements: Check the manufacturer’s instructions for fixing methods, clearances and sealing.

Resolving these details early reduces the risk of adjustments once the roof is ready for installation.

Getting the Kerb and Roof Junction Right

The kerb provides the supporting base for the roof lantern and forms the junction between the glazing system and the surrounding roof. Its dimensions, construction and position must suit the specific lantern and roof design.

The kerb should be level, square and securely fixed before the lantern frame is installed. Any variation can affect the fit of the frame, the quality of the seals and the appearance of the finished unit.

The connection between the kerb and roof covering also needs careful planning. The waterproofing detail must suit the roof system and provide a continuous, weather-resistant junction around the opening.

Avoid assuming that every lantern uses the same kerb arrangement or flashing detail. Follow the relevant manufacturer’s guidance and ensure the proposed detail is compatible with the roof construction.

Weatherproofing Around the Lantern

Waterproofing depends on how the roof covering, kerb and lantern frame meet. Poorly coordinated junctions or incomplete seals can create potential routes for water ingress, particularly where different materials come together.

Before fitting the lantern, check that the roof covering can be finished neatly around the opening and that the specified waterproofing details can be installed as intended.

Key considerations include:

  • Roof-covering interface: Confirm how the waterproof layer will meet the kerb and surrounding roof.
  • Frame seals: Use the sealing components and fixing methods specified for the lantern.
  • Corners and junctions: Check areas where the waterproofing detail changes direction or could be interrupted.
  • Final inspection: Look for visible gaps, incomplete seals or damage to the roof covering.

Weatherproofing should be considered during roof design rather than left until the lantern is fitted and the surrounding finishes are complete.

Coordinating Insulation and Internal Finishes

The lantern opening also affects the continuity of the roof insulation and the finish around the internal reveal. These details should be coordinated with the roof build-up to help reduce cold spots, condensation risks and untidy finishing.

Check how the insulation will meet the kerb and surrounding framework, following the specified construction detail. The internal finish should meet the opening cleanly without obstructing seals, fixings or components that need to remain accessible.

Thermal performance also depends on the lantern specification itself, not just the surrounding installation. Read our guide to roof lantern thermal performance for more information about heat loss and the factors that affect performance.

Checking the Finished Installation

Once the lantern is installed, inspect the frame, fixings and surrounding roof junctions before considering the job complete.

Check that:

  • The frame is correctly positioned and securely fixed.
  • Seals and weatherproofing details have been completed in accordance with the manufacturer’s instructions.
  • The roof covering meets the kerb neatly, without visible gaps or damaged sections.
  • The insulation and internal finishing details have been completed as specified.
  • Any installation checks required by the manufacturer have been carried out.

A final inspection helps identify problems while the relevant details are still accessible.

Choosing a Roof System That Works with the Lantern

Roof lantern installation is easier to coordinate when the structure, insulation and opening are considered together from the outset. The lantern should be specified alongside the wider roof design rather than treated as a separate component added at the end.

The flat roof system provides a starting point for planning the surrounding roof construction. For projects requiring a contemporary glazed feature, the S1 aluminium roof lantern is another option to consider.

By checking the opening, kerb, waterproofing and finishing details before installation, installers can reduce avoidable adjustments and deliver a more consistent result.